Warning light check function

The instrument panel performs a check on the following warning lights:

The instrument panel performs a check on the following warning lights:

❒ handbrake on/low brake fluid level;
❒ ABS and EBD system;
❒ ESP system on/failure;
❒ “Dualdrive” (where required) electric power steering failure.

Warning light check is performed automatically when turning the ignition key to MAR and during normal operation if a failure is detected. When the initial check is over, the message LEd Err will flash on the display for about 10 seconds to warn the driver that a failure has been detected (on one or more warning lights.

    See also:

    Daytime Running Lights — If Equipped
    To activate the Daytime Running Lights (DRL), rotate the end of the multifunction lever to the O symbol. NOTE: The low beams and side/taillights will not be on with DRL. The DRL function can be t ...

    Extending the boot
    Single rear seat Proceed as follows: ❒ fasten the seat buckles to the tabs on the seat back (as shown by arrows); ❒ check that the webbing (A) of each of the two side seat belts is ...

    Spare Tire Stowage
    Reverse instructions of the spare removal section. Rotate the jack wrench tool on the winch drive nut clockwise until effort becomes heavy and an audible click is heard indicating the spare is prop ...