See also:

Door lockremote control
The remote control is built into the ignition key. Press button A-fig. 4 to lock and unlock the doors. Press button A to operate the system. LED B (where required) will flash while the transmitter ...

Jacking the vehicle
WITH THE JACK See “If a tyre is punctured”, in this section. The jack should only be used to change a wheel on the vehicle for which it was designed. It should not be put to other uses or employe ...

Boot light
To replace the bulb: 1) Remove the lens A-fig. 39 as shown by the arrow. 2) Open the bulb holder B and remove the bulb C (clipped in). ...