The recline adjustment lever is located on the inboard side of the seat. To recline the seatback, lift up the recline lever, lean back until the desired position has been reached, and release the lever.
Recline Lever
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer
resting against your chest.
In a collision you could slide under the seat belt, which could result in serious
injury or death.
See also:
Shift Lever Override
If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever: 1. Firmly
set the parking brake.
2. ...
Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h:
– disconnect connection A; turn counter-clockwise the cylinder to replace and
raise it; fit the new cylinder and turn it clockwise; connect conn ...
Identification data
You are advised to note the identification codes. The identification data stamped
and given on the plates and their position are the following:
1 - Model plate
2 - Chassis marking
3 - Bodywork ...