See also:

Front direction indicators
To change the bulb, proceed as follows: 1) Turn the bulb holder A-fig. 18 and remove it. 2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling). ...

General instructions
– When a light is not working, check that it has not fused before changing the bulb. – For the location of the fuses, refer to “If a fuse blows” in this chapter. – Before replacing a bulb that doe ...

To Open And Close The Hood
To open the hood, two latches must be released. 1. Pull the bottom of the RED hood release lever, located on the left kick panel, rearward. Hood Release Lever 2. Rotate the safety catch under ...