(Multijet versions - amber)
GLOW PLUG WARMING FAILURE (Multijet versions - amber)
Spark plug pre-heating
Turning the ignition key to MAR, the warning light turns on and it will turn off when glow plugs reach the preset temperature. Start the engine immediately after warning light switching off.
IMPORTANT
With hot ambient temperature, warning light stays on for very short time.
Glow plug warming failure
The warning light turns on when there is a failure in the glow plug warming system. Contact Fiat Dealership as soon as possible.
On certain versions the dedicated message is displayed.
See also:
Electronic Speed Control
When engaged, the Electronic Speed Control takes over accelerator operations
at speeds greater than 25 mph (40 km/h).
The Electronic Speed Control buttons are located on the right side of the steer ...
Deactivation
Turn the ignition key to STOP.
At the following starting operation (key at MAR), the sensor will not be reactivated
even is the stalk is on (B). In this event, to activate the rain sensor, you have ...
To increase the memorised speed
The speed memorised can be increased in two ways:
❒ pressing the accelerator and then memorising the new speed reached;
or
❒ momentaneously turning the ring (B) to (+).
Each pulse of ...