See also:

For checking and restoring pressure only
The compressor can be also used just for restoring pressure. Disconnect the quick connection and connect it directly to the tyre valve; in this way the cylinder is not connected to compressor and ...

To close the bonnet
Proceed as follows: ❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess (D) replace it in its clip; ❒ lower the bonnet at approx. 20 cm from the engine ...

22. Electronic Stability Control (ESC) Activation /Malfunction Indicator Light
The ESC Activation/Malfunction Indicator Light in the instrument cluster will come on for four seconds when the ignition switch is turned to the ON/RUN position. If the ESC Activation/Malfunctio ...