11. Seat Belt Reminder Light

When the ignition switch is first turned to ON/ RUN, this light will turn on

When the ignition switch is first turned to ON/ RUN, this light will turn on if the driver’s seat belt is unbuckled, a chime will sound. When driving, if the driver’s seat belt remains unbuckled, the Seat Belt Reminder Light will illuminate and the chime will sound.

Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information.

    See also:

    Eobd - engine control system failure
    In normal conditions, turning the ignition key to MAR, the warning light turns on, but it should go off when the engine has started. The initial turning on indicates that the warning light is ...

    Lap/Shoulder Belt Untwisting Procedure
    Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...

    Switching on/off of the ASR system
    The ASR function switches on automatically each time the engine is started. When travelling the device can be switched off and on again pressing switch ASR OFF on the centre console. Switching o ...