When the fuel level reaches approximately 1.0 gallon (3.8L) this light will turn on, and remain on until fuel is added.
See also:
General instructions
❒ When a light is not working, check that the corresponding fuse is intact before
changing a bulb. For the location of fuses, refer to the paragraph “If a fuse blows”
in this section;
...
Set clock
To adjust the time, press button (+) to increase minutes, button (–) to decrease
minutes. Every press on the button increases or decreases by one unit. Keeping the
corresponding button pressed o ...
Front sidelights
To change the bulb, proceed as follows:
1) Remove the protection cover B-fig.
18 turning it counterclockwise;
2) Press tabs A-fig. 21, remove the bulb holder from housing B and remove the
bulb C ...