See also:

Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h: – disconnect connection A; turn counter-clockwise the cylinder to replace and raise it; fit the new cylinder and turn it clockwise; connect conn ...

Controls
HAZARD LIGHTS fig. 92 They turn on by pressing switch A, regardless of the position of the ignition key. When the lights are on, the switch and the instrument panel warning light will flash. Pr ...

To close the bonnet
Proceed as follows: ❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess (D) replace it in its clip; ❒ lower the bonnet at approx. 20 cm from the engine ...