Annual inspection schedule

For vehicles with an annual mileage of below 20.000 km (for example about 10.000 km) the following yearly inspection programmed is advised:

– check tyre conditions/wear and adjust pressure if required (including the spare wheel).

– check light system operation (headlights, direction indicators, hazard lights, boot lights, passenger compartment lights, glove box light, warning lights, etc.).

– check windscreen wiper/washer operation, adjust nozzles.

– check windscreen/rear window blade position/wear – check front disk brake pad conditions and wear.

– check cleanness of bonnet and boot locks and lever cleanness and lubrication – sight inspect the conditions of: engine, gearbox, transmission, pipes and hoses (exhaust - fuel - brakes), rubber parts (boots, sleeves, bushes, etc) brake and fuel hoses.

– check battery charge.

– visual check on various drive belt conditions.

– check and top up, if required, fluid levels (engine coolant, brake fluid, windscreen washer fluid, battery fluid, etc.).

– change engine oil.

– change engine oil filter.

– replace pollen filter (where provided).

    See also:

    General Information
    This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This dev ...

    15. Tire Pressure Monitoring Telltale Light
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire in ...

    19. Engine Temperature Warning Light
    This light warns of an overheated engine condition. The engine coolant temperature indicator will illuminate and a single chime will sound after reaching a set threshold. If the light turns on w ...