– When a light is not working, check that it has not fused before changing the bulb.
– For the location of the fuses, refer to “If a fuse blows” in this chapter.
– Before replacing a bulb that does not work, check that the contacts are not oxidized.
– Burnt-out bulbs must be replaced with ones of the same type.
– Always check the height of the headlight beam after changing a bulb.
IMPORTANT
The headlight inner surface may be lightly misted over: this is not a fault but a natural fact due to low temperature and the level of air humidity. It will disappear as soon the headlights are turned on. The presence of drops inside the headlights means water infiltration, therefore contact Fiat Dealership.
See also:
Refuelling
To ensure full tank refuelling, carry out two top-up operations once the delivery
gun has turned off twice. Avoid further top-up operations which could cause faults
in the fuel system.
The car mu ...
Change Engine Oil Indicator System
Change Engine Oil
Your vehicle is equipped with an engine oil change indicator system. The “Change
Engine Oil” message will flash in the EVIC display for approximately 10 seconds
after a single c ...
19. Engine Temperature Warning Light
This light warns of an overheated engine condition.
The engine coolant temperature indicator will illuminate and a single chime will
sound after reaching a set threshold.
If the light turns on w ...