This mirror can be adjusted by means of lever A-fig. 64
1) anti-dazzle position.
2) normal position.
The mirror is also fitted with a safety device that releases the mirror in the event of an impact.
See also:
Rear light cluster
To replace a bulb, proceed as follows:
Versions equipped with rear brackets:
1) Working inside the vehicle: remove the plastic cover fig. 25 set on the speaker
seat fitting the screwdriver under t ...
Life Of Tire
The service life of a tire is dependent upon varying factors including, but not
limited to:
• Driving style
• Tire pressure
• Distance driven
WARNING!
Tires and the spare tire should be replac ...
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...