The speedometer A-fig. 31 - 32 shows the vehicle speed.
See also:
Front direction indicators
To change the bulb, proceed as follows:
1) Turn the bulb holder A-fig. 18 and remove it.
2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling).
...
Replacement Keys
NOTE: Only keys that have been programmed to the vehicle electronics can be used
to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it cannot
be programmed to any other veh ...
Blades
Periodically clean the rubber part using special products; TUTELA PROFESSIONAL
SC 35 is recommended.
If the rubber blades are bent or worn they should be replaced. In any case they
should be chan ...