Babies up to 13 kg must be carried facing backwards on a cradle seat, which, supporting the head, does not induce stress on the neck in the event of sharp deceleration.
The cradle is restrained by the vehicle seat belts, as shown in fig. 14 and in turn it must restrain the child with its own belts.
The figure is only an example for mounting. Attain to the instructions for
fastening which must be enclosed with the specific child restraining system you
are using.
See also:
Extending the boot
Split seat
Before setting off, make sure that the seats in the direction of travel and perfectly
fastened to the anchoring. Only in this position can be seat belts be used correctly.
The boot can ...
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...
20. Brake Warning Light
This light monitors various brake functions, including brake fluid level and
parking brake application. If the Brake Warning Light turns on it may indicate that
the parking brake is applied, tha ...