REPLACING THE FILTER
1.28V version
Loosen the screws on the side and on the air cleaner cover, remove the cover (A) and remove the filtering element (B) to be replaced.
1.3 Multijet versions
Loosen the screws (A), remove the cover (B) and remove the filtering element (C) to be replaced.
See also:
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...
Door lockremote control
The remote control is built into the ignition key. Press button A-fig. 4 to lock
and unlock the doors.
Press button A to operate the system.
LED B (where required) will flash while the transmitter ...
Required Maintenance Intervals
Refer to the Maintenance Schedules on the following pages for the required maintenance
intervals.
WARNING!
• You can be badly injured working on or around a motor vehicle. D ...