The fuse is a protective device for the electric system: it comes into action (i.e. it cuts off) mainly due to a fault or improper action on the system.
When a device does not work, check the efficiency of its fuse. The conductor element (A) must be intact. If not, replace the fuse with one of the same amp rating (same colour).
(B): undamaged fuse
(C): fuse with damaged filament.
To facilitate fuse replacement, use the pliers (D) located in the fuse box.
Never replace a fuse with metal wires or anything else.
WARNING
Never replace a fuse with another with a higher amp rating; DANGER OF FIRE.
WARNING
If a general fuse (MAXI-FUSE) cuts in, do not attempt any repair and contact a Fiat Dealership. Before replacing a fuse, make sure the ignition key has been removed and that all the other services are switched off and/or disengaged.
WARNING
If fuse blows again, contact a Fiat Dealership.
See also:
Failure warnings
ABS failure
If warning light lights up together
with the message on the reconfigurable multifunction display (where provided) (see
section “Warning lights and messages”) this indicates a fault i ...
Trip computer
Pressing button , the “Trip computer”
function gives is displayed, information relating to the operating status of the
car. This function is resettable.
Values displayed are: Range to empty, Di ...
Operating Tips
Window Fogging
Windows will fog on the inside when the humidity inside the vehicle is high.
This often occurs in mild or cool temperatures when it’s rainy or humid. In most
cases, turning the air ...