To change the bulb, proceed as follows:
❒ release the tab (A) and remove the cluster;
❒ turn the bulb holder (B) anticlockwise and remove the bulb (C).
See also:
Handbrake on
Turning the ignition key to MAR the warning light on the dial turns on, but it
should go off after few seconds. The warning light turns on when the handbrake is
on.
IMPORTANT If the warning lig ...
To Vary The Speed Setting
When the Electronic Speed Control is set, you can increase speed by pushing the
RES (+) button. If the button is continually pressed, the set speed will continue
to increase until the button is re ...
Climate control (cooling)
Proceed as follows:
❒ turn knob (A) to the blue sector;
❒ turn knob (C) to 4 ;
❒ slider (B) at
❒ turn knob (D) to ;
❒ press knob (C).
Cooling adjustment
Proc ...