To change the bulb, proceed as follows:
❒ from inside the car, remove the upper plastic cover (A) with the screwdriver
provided to reach fastener (B);
❒ from inside the boot, fit extension (C) on the light cluster fastening nuts;
❒ insert the provided screwdriver (D) in the hole in the extension and loosen the
light cluster fastening nuts;
❒ withdraw the connector and loosen the fastening screws shown in the figure by
the arrows;
❒ remove the bulbs by pushing them slightly and turning them anticlockwise (bayonet
coupling).
The bulbs are arranged inside the light unit as follows:
(A) - Side/taillight bulb
(B) - Brake light bulb
(C) - Direction indicator bulb
(D) - Bulb for:
❒ left-hand cluster: rear fog light
❒ right-hand cluster: reversing light.
See also:
Button volume (Keys Volume)
The volume of the roger-beep accompanying the activation of certain buttons can
be adjusted according to 8 levels. The roger-beep can be adjusted and excluded.
To adjust the volume proceed as foll ...
Sidelights
Turn the knurled ring to .
The warning light on the instrument
cluster will come on. ...
Pollen filter
The pollen filter is located under the dashboard near the central dashboard unit
on passenger side.
REPLACING THE FILTER
Loosen the screws (A) and remove the filtering element to be replaced. ...