Direction indicators

Front

To change the bulb, remove the protective cover (3), turn connector (A) clockwise

To change the bulb, remove the protective cover (3), turn connector (A) clockwise and remove the bulb (B).

Side

To change the bulb, proceed as follows:

To change the bulb, proceed as follows:

❒ Press the lens (A) in the direction of the arrow (opposite to running direction) so to compress the clip (B) and remove the cluster;
❒ Turn the lens (A) counterclockwise and remove it; then remove the snap-fitted bulb (C).

FRONT FOG LIGHTS

Go to a Fiat Dealership to have bulbs replaced.

    See also:

    General instructions
    Wheel changing and correct use of the jack and spacesaver spare wheel call for some precautions as listed below. IMPORTANT If the vehicle is fitted with “Fix & Go (quick tyre repair kit)”, see ...

    General
    The fuse is a protective device for the electric system: it comes into action (i.e. it cuts off) mainly due to a fault or improper action on the system. When a device does not work, check the eff ...

    Inflating procedure
    Proceed as follows: ❒ Position the involved wheel with the inflation valve (A) set as shown in the figure, then pull up the handbrake; ❒ Screw the filler hose (B) to the cylinder ...