The warning light on the dial comes on (on certain versions together with the message on the display) when a failure is detected to one of the following lights: taillights, brake lights (3rd stop light excluded), rear fog lights, direction indicators.
The failure referring to these lights could be: one or more blown bulbs, a blown protection fuse or a cutoff electric connection.
Symbols 
(where provided) coming
on on the multifunction display indicate a left/right-hand light failure.
The warning light on the dial comes on (on certain versions together with the message on the display) when a failure is detected to one of the following lights: taillights, brake lights (3rd stop light excluded), rear fog lights, direction indicators.
The failure referring to these lights could be: one or more blown bulbs, a blown protection fuse or a cutoff electric connection.
Symbols 
(where provided) coming
on on the multifunction display indicate a left/right-hand light failure.
See also:
The fiat code system
To further protect you car from theft, it has been fitted with an engine immobilising
system. This system is automatically activated when the ignition key is removed.
An electronic device, in fact, ...
With toggle lens
Press the short side of the lens fig.
91 to switch the light on and off.
...
What Causes Corrosion?
Corrosion is the result of deterioration or removal of paint and protective coatings
from your vehicle.
The most common causes of corrosion are:
• Road salt, dirt and moisture accumulation.
• Sto ...