How to keep the seat belts always in efficient conditions

Observe the following:

❒ Always use the belt with the tape taut and never twisted; make sure that it is free to run without impediments;
❒ After a serious accident, replace the belt being worn at that time, even if it does not appear damaged. Always replace the seat belts if pretensioners have been activated;
❒ To clean the belts, wash by hand with neutral soap, rinse and leave to dry in the shade. Never use strong detergents, bleach or dyes or other chemical substance that might weaken the fibres;
❒ Prevent the reels from getting wet: their correct operation is only guaranteed if water does not get inside;
❒ Replace the seat belt when showing significant wear or cut signs.

    See also:

    Central door locking system
    From the outside With the doors closed, fit and turn the key in one of the front door locks. From the inside With the doors closed, press (to lock) or lift (to unlock) one of the front door knobs ...

    Treadwear
    The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would ...

    Low battery charge
    Turning the key to MAR the warning light on the dial turns on, but it should go out as soon as the engine is started (with the engine running at idle speed a brief delay in going out is allowed) ...