Always adjust the height of the seat belt to fit the person wearing it. This precaution could greatly reduce the risk of injury in case of collision.
Correct adjustment is obtained when the belt passes half way between the end of the shoulder and the neck.
Four different adjustments in height are provided.
To adjust, press button (A) and lower or raise the grip (B).
WARNING
Make the height adjustment when the car is stationary.
WARNING
After adjustment, always check that the slider is anchored in one of the positions provided. To do this, with the button (A) released, exert a further pressure to allow the anchor device to catch if release did not take place at one of the preset positions.
See also:
Vehicle Modifications/Alterations
WARNING!
Any modifications or alterations to this vehicle could seriously affect its
roadworthiness and safety and may lead to an accident resulting in serious injury
or death. ...
Display info
❒ Headlight aiming position display (only with dipped beams on) (A)
❒ Clock (B) (always displayed, also with key removed and front doors closed).
❒ Total (C) and partial ( ...
Operation
Each time the car is started turning the ignition key to MAR, the Fiat CODE system
control unit sends a recognition code to the engine control unit to deactivate the
inhibitor.
The code is sent o ...