The car is fitted with electric headlight slant adjusting device working with ignition key to MAR and dipped beams on.
When the car is loaded, it slopes backwards. This means that the headlight beam rises. In this case, it is necessary to return it to the correct position.
To adjust the headlight slant, proceed as follows:
❒ hold button (B) pressed to increase by one position (e.g.: 0 ➨ 1,1 ➨ 2,2 ➨
3);
❒ hold button (A) pressed to decrease by one position (e.g.: 3 ➨ 2,2 ➨ 1,1 ➨ 0).
Each position increase corresponds to a beam slant lowering (laden car).
Correct positions as a function of the load
Position 0 - one or two people occupying the front seats.
Position 1 - five people.
Position 2 - five people + load in the boot.
Position 3 - driver + maximum permissible load stowed in the boot.
IMPORTANT Check beam aiming every time the load carried changes.
See also:
Fluids and lubricants
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
For diesel engines, in emergency cases where genuine products are not available,
lubricants with min. performance ACEA C2 are accepted. If this is th ...
Windscreen/rear window washer fluid
To top up, remove the cap A-fig. 12 and lift the telescopic filler B, until it
clicks.
Pour a mixture of water and TUTELA PROFESSIONAL SC 35, in the following concentrations:
30% of TUTELA PROFESS ...
Dipped beam headlights
Turn the knurled ring to .
The warning light on the instrument
cluster will come on.
With dipped beam and front fog lights on, turning on the main beam headlights
will turn off automatically ...