Central door locking system

From the outside

With the doors closed, fit and turn the key in one of the front door locks.

From the inside

With the doors closed, press (to lock) or lift (to unlock) one of the front door knobs. The rear door knobs will lock or unlock only the specific door.

IMPORTANT If one of the doors is not shut properly or there is a failure in the system, the central locking feature will cut out and after some attempts the device stops working for about two minutes. In these 2 minutes, the doors can be locked or unlocked manually. After the two minutes, the control unit is ready to receive commands once more.

If the cause of the failure is removed, the device will start working properly.

    See also:

    Engine
    GENERAL FEATURES (*) For specific markets where applicable FUEL SUPPLY/IGNITION Petrol versions Electronic Multipoint sequential phased injection integrated with ignition, return less syst ...

    Downshifting
    Proper downshifting will improve fuel economy and prolong engine life. CAUTION! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the en ...

    Center High Mounted Stop Lamp (CHMSL)
    1. Remove the two guard caps and the two fastening screws. 2. Remove the center high mounted stop lamp assembly. 3. Disconnect the electric connector. 4. Press the retaining device and open the bul ...