Move the right-hand stalk downwards by one position.
The activation of the rain sensor is signalled by a control acquisition “stroke”.
IMPORTANT Keep clean the glass in the sensor area.
Turning the knurled ring (F) it is possible to increase the sensitivity of the rain sensor, obtaining a quicker change from stationary (no wiping) when the windscreen is dry, to first continuous speed (continuous, slow). The increase of the sensitivity of the rain sensor is signalled by a control and acquisition “cycle”. Operating the windscreen washer with the rain sensor activated the normal washing cycle is performed at the end of which the rain sensor resumes its normal automatic function.
See also:
General Information
• You can launch the vehicle from a stop in first, second, or third gear. The
system will ignore attempts to shift into a higher gear if the engine speed is too
low. An audible beep will sound if ...
Refuelling
To guarantee full tank filling, carry out two refueling operations after the
first click of the fuel delivery gun.
Avoid further topping up operations that could cause damages to the fuel system.
...
Child lock
To prevent opening the sliding side doors from the inside.
Engage by inserting the tip of the ignition key as shown in fig. 113 and turning
it.
Position 1 - device off.
Position 2 - device on.
T ...