Display info

❒ Headlight aiming position display (only with dipped beams on) (A)

❒ Headlight aiming position display (only with dipped beams on) (A)
❒ Clock (B) (always displayed, also with key removed and front doors closed).
❒ Total (C) and partial (D) odometer.

With ignition key removed, when opening one of the front doors the display comes on showing the clock and the odometer indication. If the “Follow me home” function is on (see paragraph “Follow me home” in this section), the display will show the time the function is on instead of the mileage recorder indication (see figure).

Warning light check function

The instrument panel performs a check on the following warning lights:

The instrument panel performs a check on the following warning lights:

❒ handbrake on/low brake fluid level;
❒ ABS and EBD system;
❒ ESP system on/failure;
❒ “Dualdrive” (where provided) electric power steering failure.

Warning light check is performed automatically when turning the ignition key to MAR and during normal operation if a failure is detected. When the initial check is over, the message LEd Error will flash on the display for about 10 seconds to warn the driver that a failure has been detected (on one or more warning lights).

    See also:

    Life Of Tire
    The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and the spare tire should be replac ...

    Follow Me Home/Headlight Delay
    When this feature is selected the driver can choose to have the headlights remain on for a preset period of time. Activation Remove the key or turn the ignition to the OFF/LOCK position, and pull ...

    With toggle lens
    Press the short side of the lens fig. 91 to switch the light on and off. ...