1. Remove the two guard caps and the two fastening screws.
2. Remove the center high mounted stop lamp assembly.
3. Disconnect the electric connector.
4. Press the retaining device and open the bulb holder.
5. Remove the snap-fitted bulb to be replaced and replace it.
6. Close the back cap locking it properly.
7. Reinstall the two fastening screws and reinstall the guard caps.
See also:
Tailgate
Opening/closing the tailgate
To open the tailgate from the outside, turn the ignition key in lock fig. 118
and pull handle A in the direction of the arrow.
The opening of the boot is made easier b ...
In the 50 United States and Washington, D.C.
If you believe that your vehicle has a defect that could cause a crash or cause
injury or death, you should immediately inform the National Highway Traffic Safety
Administration (NHTSA) in additio ...
Display Information
ID3–Tag Information Display
In addition to the information relating to the time elapsed, folder name and
file name, the radio is also capable of displaying ID3–TAG information relating
to Title T ...