1. Open the liftgate.
2. Remove the two screws and remove the tail lamp assembly.
3. Unsnap backplate and separate from the lamp housing.
4. Remove the tail, stop, or turn signal bulbs by pushing them slightly and turning
counter-clockwise.
5. Remove the backup lamp bulb by pulling straight out.
6. Replace lamps as required and reinstall lamp.
See also:
Rear Park Assist Sensors
The four Rear Park Assist sensors, located in the rear fascia/bumper, monitor
the area behind the vehicle that is within the sensors’ field of view. The sensors
can detect obstacles, in the horizo ...
Rear window and door mirror demisting/defrosting
Press to turn this function on.
Activation is indicated by the turning on of the warning light
on the instrument panel.
This function is timed and switches off automatically after 30 minutes. To ...
How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to retract completely
to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency)
locking mode.
WARNING!
• The ...