The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic.
1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean, damp rag.
2. Dry with a soft cloth.
See also:
Climate control (cooling)
Proceed as follows:
❒ turn knob (A) to the blue sector;
❒ turn knob (C) to 4 ;
❒ slider (B) at
❒ turn knob (D) to ;
❒ press knob (C).
Cooling adjustment
Proc ...
Blades
Periodically clean the rubber part using special products; TUTELA PROFESSIONAL
SC 35 is recommended.
If the rubber blades are bent or worn they should be replaced. In any case they
should be chan ...
Underhood Fuses
The Front Distribution Unit is located on the right side of the engine compartment,
next to the battery. To access the fuses, press the release tabs and remove the
cover.
Front Distribution
...