Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium-based grease, such as MOPAR Spray White Lube or equivalent to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function.
When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.
The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as MOPAR Lock Cylinder Lubricant or equivalent directly into the lock cylinder.
See also:
Limited range
Messages will be shown on the display when range falls below 50 km. ...
Rear Park Assist — If Equipped
The Rear Park Assist system provides an audible indication of the distance between
the rear fascia/bumper and a detected obstacle when backing up, e.g. during a parking
maneuver. Refer to the “Par ...
Restoring the use of the rear seat
Versions with single seat
Perform operations in a reverse order with respect to what previously described
for the boot extension operation. To prevent buckles from remaining positioned below
th ...