If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever: 1. Firmly
set the parking brake.
2. Remove the shift lever override access cover located on the right side of the
shift lever housing.
Shift Lever Override
Access Cover
3. Turn the ignition switch to the ON/RUN position without starting the engine.
4. Press and maintain firm pressure on the brake pedal.
5. Using a small screwdriver or similar tool, push and hold the override release
lever in.
6. Move the shift lever into the NEUTRAL position.
7. The vehicle may then be started in NEUTRAL.
8. Reinstall the shift lever override access cover.
See also:
Jacking the car
WITH THE JACK
See “If a tyre is punctured” in this section.
WITH A SHOP JACK
From the front
Jack up the car only by positioning the jack arm at the gearbox/differential
and placing a rubber ...
Steering Wheel Audio Controls
The remote sound system controls are located on the rear surface of the steering
wheel. Reach behind the wheel to access the switches.
Remote Sound System
Controls (Back View Of Steering Wheel)
...
19. Engine Temperature Warning Light
This light warns of an overheated engine condition.
The engine coolant temperature indicator will illuminate and a single chime will
sound after reaching a set threshold.
If the light turns on w ...