1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
2. Turn on the Hazard Warning flashers.
3. Set the parking brake.
4. Place the shift lever in PARK (automatic transmission) or REVERSE (manual transmission).
5. Turn Off the ignition.
6. Block both the front and rear of the wheel diagonally opposite the jacking position.
For example, if changing the right front tire, block the left rear wheel.
NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
See also:
Generic failure indication
(amber)
The warning light turns on in the following circumstances.
Engine oil pressure sensor failure
The warning light comes on when the engine oil pressure sensor is faulty.
Contact Fiat Deale ...
To Open
Press and hold the power sunroof switch rearward for approximately one second
and the sunroof will stop at the vented position. Press the switch a second time
and hold for approximately one second ...
Vehicle storage
The following precautions should be taken if the vehicle will not be used for
several months:
– Park the vehicle in covered, dry and if possible well-ventilated premises.
– Engage a gear.
– Make ...