1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose.
3. Place the TIREFIT kit flat on the ground next to the deflated tire.
4. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (6) onto the valve stem.
5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 Volt power outlet.
NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire.
See also:
Freeing A Stuck Vehicle
If your vehicle becomes stuck in mud, sand or snow, it can often be moved by
a rocking motion. Turn your steering wheel right and left to clear the area around
the front wheels. Then shift back an ...
FUEL LEVEL GAUGE
The needle indicates the amount of fuel left in the tank.The reserve warning
light (A) turns on (on certain versions together with the message shown on the reconfigurable
multifunction display) ...
Jump-Starting Procedure
WARNING!
Failure to follow this procedure could result in personal injury or property
damage due to battery explosion.
CAUTION!
Failure to follow these procedures could result in damage to the ...