The Hazard Warning flasher switch is located on the instrument panel below the radio.
Press the switch to turn on the Hazard Warning flashers. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. Press the switch a second time to turn off the Hazard Warning flashers.
Do not use this emergency warning system when the vehicle is in motion. Use it when your vehicle is disabled and it is creating a safety hazard for other motorists.
If it is necessary to leave the vehicle to go for service, the Hazard Warning flashers will continue to operate with the ignition key removed and the vehicle locked.
NOTE: With extended use, the HazardWarning flashers may wear down your battery.
See also:
Electronic Stability Control (ESC)
This system enhances directional control and stability of the vehicle under various
driving conditions. ESC corrects for oversteering or understeering of the vehicle
by applying the brake of the a ...
General instructions for using the seat belts
The driver is responsible for respecting and enforcing the local rules and laws
regarding the use of seat belts.
Always fasten the seat belts before starting.
For maximum safety, keep the back of ...
How to warm up the engine after it has just started (petrol and diesel versions)
Proceed as follows:
❒ Drive off slowly, letting the engine turn at medium revs. Do not accelerate
abruptly;
❒ Do not drive at full performance for the initial kilometres. Wait until ...