When the shift lever is in the AutoStick position (to the left of the Drive position), it can be moved forward and rearward. This allows the driver to manually select the transmission gear being used. Moving the shift lever forward (-) triggers a downshift, and moving it rearward (+) an upshift. The gear position will display in the instrument cluster on the transmission range indicator.
NOTE: In AutoStick mode, the transmission will only shift up or down when the
driver moves the shift lever rearward (+) or forward (-), except as noted below.
AutoStick is deactivated when the shift lever is moved out of the AutoStick (+/-) position.
See also:
Lane Change Assist
Tap the lever up or down once, without moving beyond the detent, and the turn
signal (right or left) will flash three times then automatically turn off. ...
Jacking Instruc
WARNING!
Carefully follow these tire changing warnings to help prevent personal injury
or damage to your vehicle:
• Always park on a firm, level surface as far from the edge of the roadway as
p ...
Chassis marking
It is printed on the passenger compartment floor, near the right-hand front seat.
It can be reached by lifting the special flap in the carpeting and includes the
following data:
❒ car mod ...