Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this mode, the transmission remains in third gear regardless of which forward gear is selected.
PARK, REVERSE, and NEUTRAL will continue to operate.
Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without damaging the transmission.
In the event of a momentary problem, the transmission can be reset to regain
all forward gears by performing the following steps: 1. Stop the vehicle.
2. Shift the transmission into PARK.
3. Turn the ignition switch to the LOCK/OFF position.
4. Wait approximately 10 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is no longer detected, the
transmission will return to normal operation.
NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur.
If the transmission cannot be reset, authorized dealer service is required.
See also:
Left-hand direction indicator
The warning light on the dial turns on when the direction indicator control lever
is moved downwards or, together with the right indicator, when the hazard warning
light button is pressed. ...
Engine coolant fluid
The coolant level shall be checked with cold engine and shall be included between
the MIN and MAX mark on the reservoir.
If the level is low, pour slowly a mixture of 50% distilled water and 50 ...
Emissions Inspection And MaintenancePrograms
In some localities, it may be a legal requirement to pass an inspection of your
vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states that require an ...