NOTE: Normal starting of either a cold or a warm engine is obtained without pumping
or pressing the accelerator pedal.
Turn the ignition switch to theAVV (START) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the STOP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the Normal Starting procedure.
See also:
The Fiat code system
To further protect your vehicle from theft, it has been fitted with an engine
immobilising system (Fiat CODE system) which is automatically activated when the
ignition key is removed.
An electron ...
Seat Belt Extender
If a seat belt is too short, even when fully extended, and when the adjustable
upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized
dealer can provide you with a ...
Glow plugs
Turning the ignition key to MAR, the warning light on the dial comes on and goes
off when glow plugs reach the preset temperature. Start the engine immediately after
warning light switching off. ...