When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the RECIRCULATION control button.
Recirculation mode should only be used temporarily. The recirculation LED will illuminate when this button is selected. Push the button a second time to turn off the Recirculation mode LED and allow outside air into the vehicle.
NOTE: In cold weather, use of Recirculation mode may lead to excessive window
fogging. The Recirculation mode is not allowed in the Defrost mode to improve window
clearing operation. Recirculation will be disabled automatically if this mode is
selected.
See also:
The Future of the Subaru Outback - A Look at Potential Enhancements for the 2026 Model Year
Subaru's commitment to innovation is evident in recent announcements, including the potential development of a long-range electric Forester. However, the focus of this report is on the highly antici ...
Right-hand direction indicator
The warning light on the dial turns on when the direction indicator control lever
is moved upwards or, together with the left indicator, when the hazard warning light
button is pressed. ...
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...