22. Electronic Stability Control (ESC) Activation /Malfunction Indicator Light

The ESC Activation/Malfunction Indicator Light in the instrument cluster will

The ESC Activation/Malfunction Indicator Light in the instrument cluster will come on for four seconds when the ignition switch is turned to the ON/RUN position. If the ESC Activation/Malfunction Indicator Light comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on, see your authorized dealer as soon as possible to have the problem diagnosed and corrected.

• The ESC Off Indicator Light and the ESC Activation/Malfunction Indicator NOTE:

• The ESC Off Indicator Light and the ESC Activation/Malfunction Indicator Light come on momentarily each time the ignition switch is turned to ON/RUN.
• Each time the ignition is turned to ON/RUN, the ESC system will be on, even if it was turned off previously.

    See also:

    (D) Drive Vehicle
    Immediately after injecting sealant and inflating the tire, drive the vehicle 5 miles (8 km) or 10 minutes to ensure distribution of the TIREFIT Sealant within the tire. Do not exceed 55 mph (88 k ...

    Manual Heating And Air Conditioning
    Manual Temperature Control (MTC) 1. Temperature Control Rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to the left into the blue ...

    Rear window wash/wipe function
    This device can only work when the ignition key is at MAR. To switch the rear window wiper on, turn the knurled ring from O to . To wash the window push the stalk towards the dashboard. On cert ...