14. Electronic Throttle Control (ETC) Light

This light informs you of a problem with the Electronic Throttle Control (ETC)

This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the NEUTRAL position. The light should turn off. If the light remains lit with the engine running, your vehicle will usually be drivable; however, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer.

    See also:

    Number plate light
    To change the bulb, proceed as follows: ❒ release the tab (A) and remove the cluster; ❒ turn the bulb holder (B) anticlockwise and remove the bulb (C). ...

    Tailgate
    Opening/closing the tailgate To open the tailgate from the outside, turn the ignition key in lock fig. 118 and pull handle A in the direction of the arrow. The opening of the boot is made easier b ...

    Interior Fuses
    The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver’s side under the instrument panel. Fuse Panel ...