The Glow Plug light will flash during engine oil viscosity sensor measurement in cold weather.
During this measurement (up to 10 seconds), the starter will be disabled. If the measured oil viscosity is OK, the light will turn off and the engine will be allowed to crank.
If the measured oil viscosity is too high, engine cranking will be disabled and the light will blink repeatedly until the oil temperature is raised, preferably by an externallypowered electric engine block heater (available from your authorized dealer).
The message Plug In Engine Heater , will be displayed in the instrument cluster when the ambient temperature is below 5°F (-15°C) at the time the engine is shut off as a reminder to avoid possible crank delays at the next cold start.
See also:
Tailgate
Opening/closing the tailgate
To open the tailgate from the outside, turn the ignition key in lock fig. 118
and pull handle A in the direction of the arrow.
The opening of the boot is made easier b ...
Service schedule
(*) Or every 3 years for particularly demanding use:
- cold/hot climates;
- driving in the city idling for a long time;
- dusty roads or roads covered with sand and/or salt
Or every 5 years, r ...
Passenger seat compliance with regulations on child’s seat use
Fiat Punto complies with the new Directive 2000/3/EC regulating child’s seat
assembling on the different car seats according to the following tables:
Front and rear seat (3 and 5-door versions)
...