When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established.
Pressing the RES (+) button once will result in a 1 mph (2 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (2 km/h).
To decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established.
Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed. Each subsequent tap of the button results in a decrease of 1 mph (2 km/h).
See also:
Sidelights and low beams
(green)
FOLLOW ME HOME (green)
Side/taillights and low beams
The warning light turns on when side/taillights or low beams are turned on.
Follow me home
The warning light will turn when this dev ...
Controls
(A): Air temperature knob (mixing hot and cold air);
(B): Air recirculation on/off button;
(C): Fan knob and climate control system on/off;
(D): Air distribution knob. ...
Emissions Inspection And MaintenancePrograms
In some localities, it may be a legal requirement to pass an inspection of your
vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states that require an ...