With the low beams activated, push the multifunction lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams.
See also:
Starting procedure for petrol versions
1) Ensure that the handbrake is up.
2) Put the gear lever into neutral.
3) Press the clutch pedal fully down, without pressing the accelerator.
4) Turn the ignition key to AVV and let it go the mom ...
Fuel cut-off switch (FIS)
It is located under the dashboard on the front right-hand door pillar and it
comes into operation in the case of an accident to block the supply of fuel thereby
stopping the engine.
Carefully i ...
Parking
Proceed as follows:
❒ Stop the engine and engage the handbrake;
❒ Engage a gear (first if the car is faced uphill or reverse if it is faced downhill)
and leave the wheels steered.
B ...