Windows Mobile™-based FIAT BLUE&ME™ is a personal telematic system enabling you to use communication and entertainment applications expressly designed for use in the car.
The BLUE&ME™ system installed on your car is equipped with a hands-free kit, message reader and media player, and it is preset for future installation of additional services.
The BLUE&ME™ system, fully integrated with voice commands, buttons on the steering wheel and multifunction display messages, gives you the possibility of interacting with your Bluetooth wireless technology mobile phone (even if you keep it in your pocket or bag) without having to take your eyes off the road or remove your hands from the steering wheel. To use voice commands you are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.e.: the voice recognition system is of the “speaker independent” type.
With this system you can also play your favorite music stored on USB device and select tracks and playback modes with both voice commands or buttons on the steering wheel.
This device complies with Part 15 of the FCC rules subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept all interference received, including interference that
may cause undesired operation.
See also:
Park Assist System Usage Precautions
NOTE:
• Ensure that the outer surface and the underside of the rear bumper is
clean and clear of snow, ice, mud, dirt or other obstruction to keep the Rear Park
Assist system operating properly ...
Rear light cluster
To replace a bulb, proceed as follows:
Versions equipped with rear brackets:
1) Working inside the vehicle: remove the plastic cover fig. 25 set on the speaker
seat fitting the screwdriver under t ...
Daytime Running Lights — If Equipped
To activate the Daytime Running Lights (DRL), rotate the end of the multifunction
lever to the O symbol.
NOTE: The low beams and side/taillights will not be on with DRL.
The DRL function can be t ...


