If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender. This extender should be used only if the existing belt is not long enough. When it is not required, remove the extender and store it.
WARNING!
Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
See also:
Automatic Locking Retractor Mode (ALR) — IfEquipped
In this mode, the shoulder belt is automatically prelocked.
The belt will still retract to remove any slack in the shoulder belt. The Automatic
Locking Mode is available on all passenger-seating po ...
Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h:
– disconnect connection A; turn counter-clockwise the cylinder to replace and
raise it; fit the new cylinder and turn it clockwise; connect conn ...
Transmission
CLUTCH
Hydraulic, self-adjusting external control.
GEARBOX
Five forward gears and reverse with synchromesh for front gear engagement.
Cyclical gear reduction and differential assembly incorporated ...