When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the RECIRCULATION control button.
Recirculation mode should only be used temporarily. The recirculation LED will illuminate when this button is selected. Push the button a second time to turn off the Recirculation mode LED and allow outside air into the vehicle.
NOTE: In cold weather, use of Recirculation mode may lead to excessive window
fogging. The Recirculation mode is not allowed in the Defrost mode to improve window
clearing operation. Recirculation will be disabled automatically if this mode is
selected.
See also:
Rubber tubing
Follow the “Service Schedule” to the letter as concerns braking and fuel line
rubber tubing. Ozone, high temperatures and long absence of fluid in the system
can in fact cause the hardening and cr ...
Fuel filler cap
To open the cap, turn it anticlockwise and then remove it.
During refuelling, secure the cap to the anti-loss device on the flap as shown
in the figure.
On certain versions the cap has a keylock ...
Front direction indicators
To change the bulb, proceed as follows:
1) Turn the bulb holder A-fig. 18 and remove it.
2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling).
...